 |
| 1 |
PAINT 2" BELL AND TWO 1/2" BELLS SKINTONE. PAINT FOUR 1/2" BELLS WHITE. PAINT TWO 1/2" BELLS BLACK. LET DRY. |
|
| 2 |
FOR ARM, TIE MONOFILAMENT ONTO HANGER OF ONE 1/2" RED BELL. THREAD MONOFILAMENT THROUGH ANOTHER RED BELL, PAINTED WHITE BELL AND PAINTED SKINTONE BELL. KNOT MONOFILAMENT AND GLUE TO SECURE. REPEAT FOR OTHER ARM. |
|
| 3 |
FOR LEG, TIE AND THREAD MONOFILAMENT THROUGH BELLS IN THE SAME MANNER AS THE PREVIOUS STEP. THE BELL ORDER FOR THE LEGS SHOULD BE THREE RED, ONE WHITE AND ONE BLACK. |
|
| 4 |
GLUE 2" PAINTED BELL ON TOP OF THE 2 5/8" BELL. REFER TO PHOTO TO GLUE THE BELL ARMS AND LEGS ONTO THE 2 5/8" BELL. |
|
| 5 |
CUT PATTERNS FROM FOAM, FELT AND FUR. CUT A 1/4" X 8 1/2" STRIP FROM WHITE FELT FOR HAT TRIM. REFER TO PHOTO TO GLUE CUT PIECES TO BELLS. ROLL AND GLUE FELT HAT INTO A CONE SHAPE BEFORE GLUING TO BELL. |
|
| 6 |
EMBELLISH SANTA BELL WITH EYES, POMPOMS, HOLLY AND NICOLE GLITTER GLUE. LET DRY. |
|
| 7 |
CUT AN 8" PIECE OF RIBBON AND GLUE ONTO BACK OF SANTA BELL FOR HANGER. |
|
